29 April 2016

Avert your eyes! Neon tutu tutorial


The brief was 'neon tutu' I think I nailed it don't you!

I love orange and pink together, I think its my favourite garish colour combo. I am desperately trying to decide whether put some orange back in my hair again, last time I got told I reminded people of a tutti frutti! Haha I don't think that's a bad thing do you?

Anyway, why have I made a neon tutu I hear you wondering? Why not? Honestly though there is a reason. I recently went to Leeds for a friends hen do, the theme was 80s and we were told we should be wearing neon and tutus! I did do the obvious and look on ebay for the cheap option but every time I looked at them I couldn't help think 'I'm not paying for that!' I didn't really have a plan beyond that though and by the time it was 3 days to go I realised I was a bit late to order one, there was no fancy dress shop near work and so I was just going to have to make it.

I did a bit of a search on the net for how to make tutu's but most of the results were for the no sew kind, and well I wanted to yes sew kind. I thought being as I just made up a process I would quickly type up how I did it whilst I show off the tutu in all its neon glory!


I bought one meter each of two different coloured cheap fancy dress nets from my local fabric shop (thank you My Fabric Place in Beeston) in these amazingly neon pink and orange colours. I then folder the fabric in half width wise and then in half again width wise and cut along the folds. This gave me 4 x 1 meter long pieces of both colours (8 pieces total).

Please note that I do have a small waist and whilst there is plenty of material here to make larger sizes if you want a bigger tutu, or in fact a fuller tutu you might want to consider buying 1.5 or 2 meters of each fabric colour.


Next I cut a piece of elastic which I measured to fit comfortably round my waist where I wanted it to sit (with a bit of stretch) and then added an inch for where it meets at the back. Make sure the elastic is not too stretched its uncomfortable but not so loose its not going to stay sat on your waist where you want it. I then marked the middle of the elastic with a pin.


I then lay 4 of the pieces of fabric on top of each other. I alternated mine so orange pink orange pink (have the colour you want facing out on top). You can of course do this however you like it, play about with the colours and see what works for you. You need to do the same with the remaining 4 pieces but keep these to one side we are going to be working on one half at once.


Next you need to attach the net to the elastic. You do this by making lots of large folds in the net and pinning it to the elastic. You don't need to stretch the elastic, but it might help if you do give it a little stretch as I did find my waistband didn't have much give. You want to put in enough folds that the piece extends just beyond the half way pin so there is a bit of an overlap.

Once you have done this with the first 4 pieces you then need to do the same with the second 4 pieces starting by overlapping where you left off and continuing to fold until the piece reaches the other end.


Finally you can get out your machine and using a zig zag stitch sew that bad boy down! take your time and make sure you catch all the layers.

Once you have done this overlap the two ends of the elastic and sew some tacking stitches to close the waist into a circle and that's it, time to twirl!

I did trim a couple of inches off the bottom of mine after I had stitched it as I preferred the shorter length, but you can choose whether you do this or not after trying it on.


It certainly is neon isn't it! I'm pretty sure I'm now at a point in my life where I am getting too old to wear outfits like this but regardless we had an amazing weekend away and had a great laugh (as well as some rather odd looks as we walked the streets in the day dressed in neon tutu's!). 

FYI, the matching bow I made using my Tulle Bow Tutorial

You have to excuse the lack of my face in these photos, I was a bit sleep deprived when I took them and my gaunt baggy eyes really didn't do these pictures any justice!


I hope this was a useful tutorial, or if not then a fun look into a crazy outfit! I do actually love this skirt, and I think its all to do with the colour. If only I had more occasions to dress like this!!

Have you ever made anything like this? Or bought one of those cheap ebay tutus? You should totally try making one, this one cost me £5, which was £1 less than ebay, and much nicer I think.

Now I want you to show me your crazy makes (or tutus) so I don't feel so silly!
SHARE:

5 October 2014

Starry Starry Headbands


Its all getting a bit accessories crazy over here at the moment, but I have realised just how easy and fun a few little sparkly hair accessories are to make. Not only do I love to make them but I also love to wear them, so I am very sorry but you are just going to have to bear with me whilst I get it all out of my system. 

These little numbers are stars mounted onto a band of elastic which can be worn around the head like a headband. The perfect thing about the elastic is that you can place the star anywhere on your head to mix up the look, or even wear multiples together. I love how glam rock these are. Sparkly, pink, leathery and perfectly matched to my inner child/rocker.


I got the idea when I received issue 44 of Mollie Makes  which included a free kit on the front to make a 'Boho Feather Necklace'. I wasn't a huge fan of the necklace, it just wasn't something my style and so I couldn't see myself wearing it. The kit however contained pink and gold faux leather pieces which I just couldn't put down so I had to think of something else to do with them. This is where the stars were born.

They are made from a variety of real leather, the faux leather from the kit, some of the glitter fabric which I am sure you are sick of the sight of, some felt and some elastic cord.

It was so simple, I drew up two star templates and cut out a variety of small and large stars. I then used the glue gun to attach a smaller star to the centre of the bigger one and then glued it onto a piece of felt with a length of the elastic sandwiched between the leather and the felt. Finally I cut around the felt and tied a little knot in the elastic to make it fit the size of my head.

They are by no means perfection, but I like them a lot.

 

So whats been going on around here? We have had a pretty quiet weekend to be honest. We took the opportunity to start decorating the baby's bedroom. I say we, I mean Mr Fox did it all as I am not allowed to paint and was generally feeling a little bit under the weather. Its starting to come together a bit now though. We still have a way to go but at least it feels like we are moving forwards. Other than that we did a bit of DIY shopping and that was about your lot.

I have been trying to resit the urge to buy baby a cute little Christmas outfit. There are so many cute ones out there but I am conscious of the fact that he might be late, and so late that he doesn't actually arrive until after the event. In that case a cute little Christmas outfit is a complete waste. However friends are awesome and everyone keeps telling me I should just splurge on one little thing as I won't get the chance another time so I gave in and bought this adorable little pudding baby grow. Isn't it adorable! I at least figured it could be worn even a few days after Christmas what with it just being a pudding.


Finally... and no one will read this tiny little tag line, but the next post will be post 100!! I can't believe we are there already. I am planning to do a bit of a 'review of the year' and also a little giveaway themed from the last 100 posts so check back on Friday to see what's in store. I will leave the giveaway open for a little while to give as many people as possible the chance to get involved.
SHARE:

5 May 2014

DIY Fabric Bow Belt Tutorial


Hello, and happy bank holiday! Its a gorgeous day so you shouldn't be reading this, you should be outside enjoying yourself, but if you are saving this until after the bank holiday then read ahead.

Last week I brought you my leather bow belt tutorial to make your very own very easy elasticated belt featuring a leather bow on the front.

This week I wanted to show you that this pattern is so very versatile and so if you don't fancy having a go with leather you can make a version from your favorite fabric, how good is that! Whats even better is that this is a great little stash-busting idea, perfect for your favorite fat quarter, or just some of your favorite leopard print fabric that you use to make everything! This little version took me less than an hour to make yesterday whilst I waited for the supermarket delivery so gogo get at it. 

For that fabric bow belt you will need:
  • Enough 2inch wide elastic to fit round your waist (colour of your choice)
  • Some of your favorite fabric
  • Heavy Interfacing
  • Polyester thread
  • 4 x popper notions (I used the same as my leather belt but you can use sew on as well)
  • Popper tools (if not using sew on studs)
  • Bow pattern (click here to download the PDF)
N.B. this will work with most fabrics but cottons work best. thicker fabrics such as denim/twill may not require interfacing, but anything thinner will to keep the bow looking sturdy.

The pattern follows the same basic steps as the leather version however there are a few additional sewing steps.


Step 1: 
Using the outside edge of the pattern cut out the following in both your fabric and your interfacing:
2 x large bow pieces
2 x thin center pieces
4 x rectangle popper pieces (on the fold)

Step 2: 
Iron on a piece of interfacing to wrong side of each fabric piece





 Step 3:

Using a 1/2 inch seam allowance sew around the pattern pieces as shown on the pattern document, making sure to leave one end of the large bow piece open to turn

Step 4:
Turn all your pattern pieces the right way up and press

Step 5:
Finding the center of the elastic, and with the ends of the bow folded in to the center at the back, stitch the center of the bow to the center of the elastic with a straight line making sure your raw edges or tucked in.

Step 6:
Tuck in the two raw edges of the center bow strip and stitch them together. Thread them over the elastic and bow so it sits neatly in the middle covering your straight line of stitches.
(picture details on these steps can be found here)


Step 7: 
Making sure your raw edges are tucked in fold your popper piece over the end of your bow and top stitch round all edges on both ends of the belt.

Step 8: 
Attach two poppers to each end of the belt making sure the tabs overlap neatly when closed.

Step 9:
Wear your new creation with pride, and contemplate just how many of these you can fit in your wardrobe!!!

Of course it would make me very happy to see your versions of these so please feel free to leave a comment linking yours, or send me a picture.


SHARE:

2 May 2014

DIY Leather Bow Belt Tutorial


I'm so pleased to be bringing you this tutorial, its something I have had in my head for a while but had no idea how easy this would be to pull off having never, ever, worked with leather before in my life. So here we go, proof that you don't need to have any experience at all to have a go at this, it is that simple.

I have an elasticated belt, which I bought from a major grocery retailer, which I wear with everything. Mr Fox said to me the other week 'what are you going to do when that belt breaks' well Mr Fox, this is what I am going to do! This is going to be a very pic heavy post so I will keep them small and hopefully they will help illustrate the steps.


For the Elasticated Leather belt you will need: 
  • Enough 2inch wide elastic to fit round your waist (colour of your choice)
  • Some Leather (colour of your Choice
  • Leather sewing machine needles
  • Polyester thread (you should not use cotton as it deteriorates) 
  • 4 x Leather popper notions
  • Leather popper tools
  • Hammer
  • Bow pattern(click here to download the PDF)

Step 1: Measure the elastic around your waist and cut it so that it fits snug but is not over stretched. You will be overlapping the ends so this will give it a bit more fit.


Step2: Using the inner lines on the pattern (you don't need the seam allowance) cut out your pieces of Leather using the pattern as follows:
1 x large bow piece
1 x thin center piece
2 x back popper tabs (on the fold)


Step 3: With the front of the bow piece facing down fold the outside edge into the center  making sure the tap is on the other side of the bow


Step 4: Fold the other side over to the middle making sure the two long pieces are overlapping in the center and that the curves of the bow match on both the front and back.


Step 5: Folding your elastic in half mark the center point with a pin. Place the bow right side up with the narrowest point of the bow lined up with the pin. N.B. you shouldn't pin leather as the holes become permanent.


Step 6: With your leather needle in your sewing machine stitch a line through all layers of the bow and elastic securing the center of the bow to the elastic. Make sure to secure the stitches at either end.


*Check it out, you just stitched some leather on your machine! how easy was that (told you).


Step 7: Taking the center strip of leather fold this around the middle of you bow making sure that there is a small overlap at the back.


Step 8: Using the machine, with right sides together, secure the two ends of the center strip to make a circle. You can see I actually top stitched two lines on this piece. This step is entirely personal preference and is not required.


Step 9: Working from one end of the elastic string the center strip (now circle) feed the elastic through the middle and wiggle you leather a bit to get the strip into the middle of the bow with the seam at the center back. This should be tight enough to sit there without moving around. If its not just remove it and make the circle slightly smaller trimming off the excess.


Step 10: Take your two end pieces and fold them in half over each end of the elastic so the leather covers both sides equally and the fold is at the end of the elastic.


Step 11: Top stitch around all 4 sides of the two end pieces to secure in place



Step 12: Using your poppers and popper tools put two poppers on the ends of your belt. Make sure that you get them the right way round so that when they are pressed together the belt lies in a flat circle and the two end pieces overlap. My advice would be to punch the holes in one side and then overlap them punching the holes for the other side through the holes you just punched to make sure they are even. I am not going to show you how to use the popper tools, instead I am just going to link you to this tutorial which is all I followed.


Now pear your new belt with your favourite outfit and wear that sucker with pride!

Of course it would make me very happy to see your versions of these so please feel free to leave a comment linking yours, or send me a picture.

SHARE:

17 March 2014

Simplicity 2258

I am cheating a little bit with this post as this is actually something I made around a year ago, post GBSB1, that never made its debut on the internets.


The Pattern: Simplicity 2258
View: C
Fabric: Leopard print cotton (I think quilting)
Fabric Source: Derby Eagle Centre Market


About the pattern: This is the first item of clothing I made from a pattern (apart from a corset) in many many years, I don't know why I feared it so much. I was determined with this pattern that I would follow the instructions and sew it word for word. The pattern is actually really easy to follow and the construction was simple. This actually was the perfect starting project. It has an elasticated waist so no fiddly fastenings, but the pockets and tie make it a bit more interesting.


About the item: I hate it! I mean its really horrible. The skirt itself is really nice and the pockets are really deep and AWESOME, I want to keep my hands in there all day! I like the length as well. However; the elasticated waist is not flattering, I really don't like the tie bit, I know it hides the elasticated bit but it just feels really big, and the shape of it on me just makes me feel like I am wearing a sack. I think a lot of this might be down to the poor fabric choice (I know, I know, novice seamstress sewing in quilters cotton!) but I am reluctant to remake this because of the elasticated waist. It really is a shame as I really want to like it.


I am sure one day I will find a suitable fabric/use for this pattern, I maybe need to figure out the darts whilst keeping the pockets and add a zip in there. But that will wait for another day. Do you have any items you love to hate/hate to love? I would be interested to hear about them, I am sure we have all been there done that at some point. 

p.s. I apologise for looking grumpy in these pictures, the neighbours 16yr old son and his mates were hanging out in the garden, and needless to say, I was trying to look less weird than I already did taking pictures of myself in the garden!
SHARE:
Blogger Template Created by pipdig